Cs 1000E CPPM Sig Server tools menu on bootup

[Crowtalks]

On a CS 1000E 5.5 CPPM Sig Server that's already configured, how do I get to the tools menu on bootup (or through OAM) using tera-term (or hyperterm)?

NCSS NCTS NCTE

 

[allenmac]

If it has already been configured, then you will need a compact flash card in the faceplace with the install software.

Put the CF in the faceplate, reboot the server, and when you are prompted to boot from the faceplace, press F.

 

[Crowtalks]

The problem is it didn't come with install media, the installation info came with the hard drives

NCSS NCTS NCTE

 

[phones1]

look up in the NTP's about making a bootable CF for the CPPM Sig Ser(software available from Nortel site). make one of those then follow allenmac

Remember if it doesn't work hit it harder

Scott UK

 

[Crowtalks]

Good idea...

NCSS NCTS NCTE

 

[MagnaRGP]

You will need a 512mb CF card.

 

[Crowtalks]

I wasn't successful creating a bootable disc, but I was able to change the boot sequence following a procedure in the Sig Server NTP and was able to access the tools menu. Thanks for the replies...

NCSS NCTS NCTE