Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating blocks of spare TN's

Status
Not open for further replies.

LaurenHider

Technical User
Jan 15, 2020
5
GB
Hi all,

Apologise if this has already been covered in a separate thread.

I'm looking to take on more responsibilities in the system which usually would've been referred to the supplier although manageable in house.

I want to be able to create spare TN's for assignment when the current TN's under LUVU are used up. We would normally work with a block of 100.

System is CS1K version 7.65

Appreciate any advice

Lauren - UC Technician (learner)
 
Are you talking about Virtual TN's for IP phone's or digital and analog TN's? Tn's are based on Loop, shelf, card and unit. So each loop can give you 256 TN's . You don't want to create TN's for a hard wired loop unless it is physically equipped. Virtual TN's , sure, have at it.
 
Hi KCFLHRC,

This is a virtual TN for IP phone's

Kind regards,
Lauren
 
Then have at it. Look at your CEQU and you will see virtual loops preceded with a V
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top