Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Created superloop SUPL but no available TNs

Status
Not open for further replies.
Oct 23, 2009
15
US
I created a virtual superloop so that I can add additional VoIP phones, but I don't have any available TNs. I've done this before, but I think I am missing a step. Forgive me, but I did it in the web interface on our CS1000e... hangs head in shame...

REQ prt
TYPE supl
SUPL 140

SUPL SUPT SLOT XPEC0 XPEC1 SHLF ZONE0/1 IPR0/1

140 ---- ---- VIRTUAL -- - - --- --- - --- ---------------

 
As you have just created a new Superloop, then you will have 32 TN's available from 140 0 00 00 to 140 0 00 31 on the first slot going up to 140 0 15 31. This means that you should have 512 TN's available for Superloop 140 0.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Yea that's what I thought too.

REQ: luvu
TYPE: 1230
TN 140

SCH0822


SCH0822
Specified loop has no unused units.

Severity: Info
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top