Created superloop SUPL but no available TNs

[ChickenMan81]

I created a virtual superloop so that I can add additional VoIP phones, but I don't have any available TNs. I've done this before, but I think I am missing a step. Forgive me, but I did it in the web interface on our CS1000e... hangs head in shame...

REQ prt
TYPE supl
SUPL 140

SUPL SUPT SLOT XPEC0 XPEC1 SHLF ZONE0/1 IPR0/1

140 ---- ---- VIRTUAL -- - - --- --- - --- ---------------

 

[Firebird Scrambler]

As you have just created a new Superloop, then you will have 32 TN's available from 140 0 00 00 to 140 0 00 31 on the first slot going up to 140 0 15 31. This means that you should have 512 TN's available for Superloop 140 0.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[ChickenMan81]

Yea that's what I thought too.

REQ: luvu
TYPE: 1230
TN 140

SCH0822


SCH0822
Specified loop has no unused units.

Severity: Info

 

[ChickenMan81]

I just had a moment of clarity thanks to firebirdscrambler and the following forum posting. God bless the search function! Didn't realize that I had additional TNs available, I just had to push the programming instead of searching for them.

http://tek-tips.com/viewthread.cfm?qid=1673747