Hey guys,
A customer of mine has a callpilot100 v3.0 that seems to have stopped working over the weekend. When I arrived, both LEDs by both ports (1 & 2) were flashing very quickly nonstop, and when trying to access the VM/AA using F981,F983, etc. I get the dreaded inactive feature. I tried rebooting both the callpilot and the MICS alternately and in every combination thereof. Now, everytime i plug the power into the CP, the port LEDs blink once for a split second, and then nothing, no lights ever again. If I fiddle with the power plug just right, both port lights just start to blink very quickly as they were when I first showed up. The power adapter is the newer 8v, and i get no output via a console connection to hyperterminal, putty, etc. Any Ideas?
Thanks!
A customer of mine has a callpilot100 v3.0 that seems to have stopped working over the weekend. When I arrived, both LEDs by both ports (1 & 2) were flashing very quickly nonstop, and when trying to access the VM/AA using F981,F983, etc. I get the dreaded inactive feature. I tried rebooting both the callpilot and the MICS alternately and in every combination thereof. Now, everytime i plug the power into the CP, the port LEDs blink once for a split second, and then nothing, no lights ever again. If I fiddle with the power plug just right, both port lights just start to blink very quickly as they were when I first showed up. The power adapter is the newer 8v, and i get no output via a console connection to hyperterminal, putty, etc. Any Ideas?
Thanks!