Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Coverage Answer Group and Caller ID

Status
Not open for further replies.

pitochueco

Technical User
Aug 8, 2006
16
US
Here is the scenario....

An outside caller rings extension 2000, which is an X port in the system with a coverage path of 2. Coverage path 2 uses Coverage Answer Group 2 as its coverage point. There are 4 phones in the coverage answer group.

When one of the users in the coverage answeer group gets the incoming call, Caller ID is not passed, and it states that the call is from the X port station.

Any ideas how to "Clean this up"

Thanks
 
Hi,

Try making ext. 2000 a hunt group. That is what we did a long time ago. If you have vectoring capabilities, make it a vdn, and vector it to point to (again) a HG.

Cedric [afro]
 
Cedric,

Thanks for that. My users want to be alerted all at once (broadcast). I don't know if a hunt group will allow this to happen?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top