I have a console 2250 which i try to forward a call to voicemail. The problem is when I try to forward the call it wont go through because it dials as a dial tone instead of touch tone. Is there a setting I need to program on the phone?
If not, you may need to add it in the CDB under ATT_DATA. It has been a while since I added a console or worked on them, so I apologize I don't have the exact process.
nevermind i was able to printout the currently console setup. I see that all four of my consoles have KEY 09 EES. I need to figure out which is KEY 09 on a console.
If I rememeber my consoles, Key 9 would be a part of the rows to the right of the main ICI field. The center row of keys, above the volume control, are the main ICI keys, the next row to the right should start at 0 on the bottom and work their way up, then over. I could be wrong on this as well.
One way to figure it out would be to print out all the keys and see if you can find a labeled that matches what is configured. Then work your way back or forwards. (One thing I just thought of is see if you have a key on the console labeled TONES. That was a popular way to explain to operators what the key did.)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.