connection of md 110 and dialog 4422 IP Phone

[mheroy]

Hi all,

I am not so familiar with PABX, i recently take over our PABX system here in our company. I am trying to connect a dialog 4422 with our MD 110 pabx, BC12SP6/R3B version. I connected the MD 110 to our LAN thru ELU 32. but i dont have the IP Address of ELU 32. I got the dialog 4422 connected with our LAN too...What should I do with the configuration?...


mheroy

 

[rfpup]

Check if the phones are DBC 422 01 or DBC 422 02
If you have the second model you need to upgrade your PBX at least at BC12sp9

 

[mheroy]

Hi,

how can I check if my IP Phone is DBC 422 01 or DBC 422 02?

 

[whosrdaddy]

look at the sticker on the back of the phone, its states DBC422 0x (where x is 1 or 2)

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[benaja75]

Hi brethen,
I upgrade my system to tswsp6.When I DUSYI, I had a result like CHECSUM ERROR IN FILE PFM.P. I did DUSYI again and it seems to be OK. then I try command below and see the result.


<DUBDP;
BACKUP DATA
EXTERNAL BACKUP LATEST PREVIOUS
REL1 REL2
06:57 03FEB09 06:57 03FEB09
LOCAL BACKUP
DIVERGENT TIME AND DATE LIM 1 06:57 03FEB09 19:27 02FEB09
2 06:57 03FEB09 19:27 02FEB09

 

[mheroy]

/daddy,

i got an DBC 422 01.

 

[whosrdaddy]

you can get the IP address of the ELU32 board by typing command

IPBOP:BPOS=ALL;

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[mheroy]

/Daddy,

I tried what you said and i got this reply:

<IPBOP:BPOS=ALL;
NOT ACCEPTED
BPOS
NOT FOUND

mheroy

 

[whosrdaddy]

do you actuallya have an ELU32 board?

if this is the case you need to initiate the board (CNHUI)
and then assign IP address (IPBOI)

don't you have a service provider that can do this for you?

Cheers,
Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[mheroy]

I will try to initiate the board, i got two ELU32 in the cabinet.


mheroy