Connecting VAL with Avaya Voice Announcement Manager

[Ricadri]

Hello

I have troubles to connect on my val with Avaya Voice Announcement Manager. I don't know how to set the connection. I enter the correct IP, set Port at 21, and une my login and password same as ASA, but it does not work.

The VAL is curently working with a lot of annoncement on it, and I have to upgrade two annoucements.

 

[TykeUK]

try using port 5023

 

[SF0751]

Change the port to 5111.

Susan
"Opportunity is missed by most people because it is dressed in overalls, and looks like work." - Thomas A. Edison

 

[Ricadri]

Thu Feb 15 15:23:27 CET 2007 **Task: Get VAL Board Information, Task ID: 1** Connection to val failed. The port is incorrect or another error occurred.

 

[Ricadri]

I try port 5023 and 5111

 

[SF0751]

From the HELP file in VAL Manager:

Determining IP Network Port

To determine the IP network port number of the C-LAN board on a voice system, complete the following steps:
1 Log in to the voice system.
2 Type list ip-interface and press Enter.
3 Look for the C-LAN board that you want to use and note the value in the Node Name field.
4 Type display ip-services and press Enter.
5 In the Local Node field, look for the Node Name you noted from the previous screen.
 Next to it, in the Local Port field, will be the IP Network Port number for that C-LAN board. You may see several entries for the same C-LAN board. If you do, they will probably all have the same IP Network Port number, which you should use. If they don't, however, you can probably determine which Port to choose by examining the Remote Node Name field, which lists the Node Name of the device that that particular C-LAN/Port combination communicates with. For example, you may have to choose between 3 entries for the same C-LAN board, but one of them might have "Voice Announcement Manager" in the Remote Node Name field. Choosing the Port number for that entry would probably be correct.

Susan
"Opportunity is missed by most people because it is dressed in overalls, and looks like work." - Thomas A. Edison

 

[Ricadri]

Thanks,

it seems to work...

I'm connecting to a CLAN instead of a VAL directly.