Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connect Me Voice SIP trunk with IP Office

Status
Not open for further replies.

jayjr1105

IS-IT--Management
Jan 14, 2014
619
US
Struggling with getting a SIP trunk setup from a new provider Connect Me Voice. IPO ver 11, embedded VM.

I've tried so many variations of setting it up but still seeing Trunk out of Service from System Status.

Anyone have a good template or KB for using this provider?
 
Create an additional URI, Incoming group 17, outgoing group 18 (or something else, just be unique), change each "Auto" to "Use Internal Data". Create a new ARS that targets outgoing group 18, and make sure you have a valid telephone number in the User's SIP tab
 
What's the downside of not creating a separate URI and changing those 4 to 'use internal data'?
 
Thanks. What is the setting I see sometimes in the ARS that has @ followed by some numbers. How is that different than sXXXXXXX ?
 
The @xyz.ab adds the SIP domain to the called number. But that's obsolete since it is set based on the SIP trunk config.

Need some help with IP Office? IP Office SIP trunk configuration: CLI based cale blocking: SCN fallback over PSTN:
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top