Configuring Twilio SIPs with IP500 V2

[bigfrenchy1986]

Hi Guys

Does anyone have any experience setting up Twilio SIPs with an IP500V2? I have seached the internet but I'm unable to find any guides or real information on the configuration of the SIP Line.

Any help would be appreciated.

 

[janni78]

Have you tried anything?
Most SIP trunks at setup pretty much the same way.

"Trying is the first step to failure..." - Homer

 

[bigfrenchy1986]

I have configured them as per the information I have been able to get from various other US SIP providers. I have plenty of experience setting up Gamma SIP trunks and also Voiceflex. However the configuration of these trunks seems slightly different.

I'm struggling to find any configuration information online regarding settings these up other than, people have succeeded but unfortunately haven't explained the set up.

I think the main point I'm unsure about is the URI entries.

 

[AACon]

Yes I have, and it was a royal pain the ass.
I can't get into the customers system at the moment, but if I do I'll post back with some config notes.

-Austin
I used to be an ACE. Now I'm just an Arse.

 

[bigfrenchy1986]

Thank you, I have managed to get inbound working however I'm still working on outbound. It is proving to be fairly tricky! Any information you can find would help massively!