PcolaSteve
Programmer
I have created two VLANs on my Cisco 2950 Switch, one for my PCs and peripherals, and the second for a set of nine security cameras. The first VLAN is setup and running fine. My question is about the second VLAN.
Though it is technically set up and almost GTG, the cameras require that a port be assigned to them, ie. port 8011, 8012 etc. I have never configured any device onto a VLAN that required an assigned port number to them.
Is there a configuration that I am missing? For testing purposes, I changed the IP of one of the cameras to reflect the IP scheme for the first working VLAN, but could not even ping it.
The shortest distance between two points is NOT a straight line; it's through a worm hole!
Though it is technically set up and almost GTG, the cameras require that a port be assigned to them, ie. port 8011, 8012 etc. I have never configured any device onto a VLAN that required an assigned port number to them.
Is there a configuration that I am missing? For testing purposes, I changed the IP of one of the cameras to reflect the IP scheme for the first working VLAN, but could not even ping it.
The shortest distance between two points is NOT a straight line; it's through a worm hole!