Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Conference CS1000E Rls 5.5 3

Status
Not open for further replies.

Kotar0

Technical User
Dec 16, 2008
33
FR
hello everyone !

I have a problem with the conference..

When I try to do a conference with a 3rd guy, I push the conf button, enter the other number phone.
The new phone answer, i can speak with him but the 1st One stay in waiting ( on hold).
I can push again the Conf button for let him come in the conf...

I use 2004P2 phones, there is a conference touch already configured (AO6).

Loop conf and TDS:
LD 17 => CEQU => MGTDS 126 and 127
MGCONF 128

Do you know this problem ?


 
It doesn't read like a problem 1 on - hit Conference - get the new caller - other is on hold until you hit conference the Second time.

Mato' Was'aka
 
Does the phone have CLS FTTR ?

You need CLS FTTC or FTTU

This assumed FTOP is set to restrict

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]
 
It is working correctly unless they want "No-hold Conference"



Mato' Was'aka
 
when i - hit Conference - get the new caller - other is on hold, I hit conference the Second time but nothing happen..


I check the CLS but still not working..
maybe there are others CLS to use ?

 
I would check the Route Data Block NEDC and FEDC

Print the phone and routes the calls are on for us and post here.

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]
 
It's not working because the first one stay on hold all the time..
 
Yes, we've determined that. Print the phone and routes the calls are on for us and post here.

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]
 
Ok GHTROUT,

For the route (i have juste one) :
TYPE RDB
CUST 00
ROUT 66
DES SIPRTE
TKTP TIE
NPID_TBL_NUM 0
ESN NO
RPA NO
CNVT NO
SAT NO
RCLS EXT
VTRK YES
ZONE 003
PCID SIP
CRID NO
NODE 10
DTRK NO
ISDN YES
MODE ISLD
DCH 0
IFC SL1
PNI 00000
NCNA YES
NCRD NO
FALT NO
CTYP CDP
INAC YES
ISAR NO
DAPC NO
MBXR NO
PTYP ATT
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 888
TCPP NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
SIGO STD
STYP SDAT
MFC NO
ICIS YES
OGIS YES
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GTO 896


PAGE 002

GTI 896
SFB 3
NBS 2048
NBL 4096
TFD 0
EESD 1024
SST 5 0
DTD NO
SCDT NO
2 DT NO
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
NATL YES
SSL
CFWR NO
IDOP NO
MUS NO
PANS YES
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
AUTH NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
OPR NO
ALRM NO
ART 0
PECL NO
DCTI 0
TIDY 888 66
ATRR NO
TRRL NO
SGRP 0
ARDN NO
AACR NO



And for the Phone:
REQ: prt
TYPE:
TYPE: 2004P2
TN 252 0 0 0
DATE
PAGE
DES
MODEL_NAME
EMULATED
KEM_RANGE

DES TEST1
TN 252 0 00 00 VIRTUAL
TYPE 2004P2
CDEN 8D
CTYP XDLC
CUST 0
NUID 4000
NHTN 252 0 00 00
CFG_ZONE 005
CUR_ZONE 005
ERL 0
ECL 0
FDN
TGAR 0
LDN NO
NCOS 0
SGRP 0
RNPG 0
SCI 0
SSU
XLST
SFLT NO
CAC_MFC 0
CLS UNR FBD WTA LPR MTD FND HTD ADD HFA CRPD
MWD LMPN RMMD SMWD AAD IMD XHD IRA NID OLD VCE DRG1
POA DSX VMD SLKD CCSA-CSA SWD LND CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHD IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD VOLA VOUD CDMR ICRD MCDD T87D KEM2 MSNV FRA PKCH
CPND_LANG ENG
HUNT
LPK 0
PLEV 02
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 MCR 4000 0 MARP
01 MCR 4000 0
02 MCR 4444 0 MARP
03 DSP
04 COS
05
06
07
08
09
10
11
12
13
14
15
16
17 TRN
18 AO6
19 CFW 16 4002
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27
28
29
30
31
DATE 3 NOV 2006


NACT
 
Are you not getting a "Connect" soft key after pressing Conference and getting the 2nd party on line?

War Eagle!
Lions Baseball '09!
 
not I getting a again "Conf" soft key after pressing Conference and getting the 2nd party on line but the first one stay on hold.

Yes I have testes withe FTTU , FTTC and FTTR
 
This is what I'd do to the trunk route:

Reduce the EOD and ODT timers to 1024
Set the NEDC and FEDC to ETH

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]
 
have you verified CDB in 15 as well??

FTOP (FRES)
TBFT FTTB
FTLY
Flexible Trunk to Trunk Connection Option


EXTERNAL XFER
CDB
Net Data - TRNX-YES
EXTT-YES

RDR Data - CFF (not CFO)
FTR Data - CFF

Mato' Was'aka
 
This also looks like a Tie to another CS1000. What kind of trunks are you using to get to the outside world? How is the d-channel programmed for this tie route?

War Eagle!
Lions Baseball '09!
 
The conference don't work in first time between the internal phone on the same CS1000E..
 
yes in ld 38 the conf wasn't activate

i do :
>ld 38
.ENLL 128
OK


.STAT 128
CNFC 00 DSBL 00 BUSY
CHAN 00 DSBL 00 BUSY


But still not working..
 
What makes you think is wasn't activated? If it wasn't activated, no phones would be able to transfer.

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]
 
Or was the problem no phones could transfer at all?

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top