Conecting S8720 and Cisco call manager

[telering]

Dear All,

We have S8720 Rel 4.0, our company is merged with another company they have cisco call manger.

We need to conect both the system to make extn calls.

What info avaya need from Cisco call manger Like Ip address Subnet mask etc.

What info we need to give cisco tech

Pls advice

Thanks

 

[simreal]

There are a few references out there to help with this. One from Avaya and a couple from Cisco depending on the type of trunk you would like to setup. The Avaya and Cisco docs are pretty much the same.


Avaya Job Aid to connect to cisco with H.323:

http://www.avaya.com/master-usa/en-us/resource/assets/applicationnotes/acm-cisco-gw.pdf

Cisco Job Aid to connect to Avaya with H.323:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/pbx_int/430317av.pdf

Cisco Job Aid to connect to Avaya with QSIG:

http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a00803d22cd.shtml

 

[uzumaki]

You can go use IP Trunks. Simreal's documents are enough.