Comparing m2000 to m3900 phones 2

[superjett]

We have mostly 2616 phones nowadays, but I'm wondering if what I've heard (from one person) is true---that the 3900 phones aren't as reliable as the 2000's.

I'm sure some of you have both types, is one easier to learn/use/program than the other?

 

[hawks]

The only problems that I've really heard;
1) Make sure that the phone rls is compatable with the RLS on the switch
2) Some people have had trouble resetting the directory password on the 3904. don't know the cause are resolution on this one.
Other than those 2 things the phones seem to be very well received.

 

[johnpoole]

rls 23 or so was bottom for 3900, no diff in the software, unless a few more default keys on the three and you don't have to label the phones, i don't care what they cost i can make 100 changes a day on sites all over the state and the new key marks itself. haven't had any prob with phonhes going bad.

john poole
bellsouth business
columbia,sc

 

[superjett]

Sounds great, I trust everyone's opinion here much more than the person that told me they were junk---we don't use him anymore anyway, I've taken over all the programming myself now.

Sounds like I need to get a few to play with since we need to order a few phones anyway.

 

[johnpoole]

just make sure, go to ld 11 new..3903..make sure your software knows what a 3900 set is, a ? mark at the tyoe prompt will tell you if your rls and keycodes allow 3900.

john poole
bellsouth business
columbia,sc

 

[technickelone]

I replace every 2616 with 3903. No more labeling and I have had now problems.

 

[superjett]

I tried setting up a new 3903 and it will take it just fine, have one being delivered today. I don't see why not to change over since I get refurb'd ones for the same price as a 2616 as long as they're just as easy to use, or easier.

 

[hawks]

What RLS is the software of your switch the reason is
RLS24.24/24.25 Phase 1 phones (phase 2&3 will not work)
RLS25.08 Phase 1 (phase 2&3 work but only at phase 1 level)
RLS25.10/25.30 Phase 1&2 work (phase 3 at phase 2 level)
RLS25.4 and above all phones work.

 

[superjett]

I just received my 3903 and since it's the first one, I need to build it in the system.

Can someone point out what needs to be changed or whatever compared to how my 2616 was programmed?

Here's the old phone:

DES CI
TN 006 0 00 14
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN 7000
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
CLS UNR FBD WTA LPR MTD FNA HTA ADD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
CPND_LANG ENG
RCO 0
HUNT 7000
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 4101 0 MARP
CPND
NAME DARIN JETT
XPLN 10
DISPLAY_FMT FIRST,LAST
01 SCR 5101 0 MARP
02 MWK 7000
03
04 CFW 4 4106
05 TRN
06 AO6
07
08 ADL 24 98960851
09 ADL 24 912703954143
10 ADL 24 916165312464
11 ADL 24
12 ADL 24
13 ADL 24
14 ADL 24
15
DATE 23 JUN 2004

 

[johnpoole]

DES SWITCH
TN 056 0 14 14
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
FDN 3301
TGAR 4
LDN NO
NCOS 4
SGRP 0
RNPG 99
SCI 0
SSU
LNRS 16
XLST
SCPW
CLS UNR FBD WTA LPR PUA MTA FNA HTD ADD HFA GRLD CRPD STSA
MWA RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTA SFA DDV CNID CDCD MSID DAPA BFED RCBD
ICDD CDMD MCTA CLBD AUTU
GPUA DPUD DNDA CFXA ARHA FITA CLTD ASCD
CPFA CPTA ABDD CFHD FICA NAID RNGI AGRD MOAD AHD
DDGA NAMA
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
CPND_LANG ENG
RCO 1
EFD 3301
HUNT
EHT
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLNG ENG
DNDR 0
KEY 00 MCR 4940 0 MARP
CPND
NAME PBX ROOM
XPLN 8
DISPLAY_FMT FIRST,LAST
01 MCR 4940 0
CPND
NAME PBX ROOM
XPLN 8
DISPLAY_FMT FIRST,LAST
02
03 TRC
04 SCC 0080
05 CSD
06
07
08 MIK
09 MCK
10
11 ADL 24 8220
12
13
14
15
16 MWK 3301
17 TRN
18 AO6
19 CFW 16 1962
20 RGA
21 PRK
22 RNP
23
24 PRS
25
26 CPN
27 CLT
28 RLT
29
30
31
ld 11
out
2616
6 14
new
3903 or 4
at the
hunt = 7000
fdn = 7000
lhk = 1
cls = fna hta lna ddga cpfa nama sfa mwa

key 0 scr 4101
key 1 scr 5101
key 16 mwk 7000


17 TRN
18 AO6
19 CFW 16 1962
20 RGA
21 PRK
22 RNP

put it in with key 0 and 1, then print it. you'll be happy to see the defaults, you get a mess lamp without key 16, with key 16 the soft key knows where to dial


john poole
bellsouth business
columbia,sc