We have an Ericsson MD110 BC10 and an Octel Sernade 3.0 looking for the code or easier way of diverting a hunt-grp to voicemail.
*24#hunt-grp ext no.*voicemail ext no.# ?did not work I may have the wrong parameters.
Thanks
Mack
to activate: *24*[GH-Number]*[Voicemail number]#
inactivate : #24*[GH-Number]*
additionally, i've set an individual diversion to the voice-mail. Effect: If all members of the group hunt are logged off the calls will be automatically divert to the voice-mail.
It roulez very good by us ! We used this configuration for a mini-mini call-center
good luck by testing C Ya soon
goa999
......
and thx for all answers and sorry for my bad english ;-)
Thanks for that goa999 I was testing and it was the spexi I was missing one difference for us to inactivate : #24*[GH-Number]# not *
No tworries on your english you get the point across
Hi, The best way to divert a hunt group to voicemail is to program cdini:htgrp#,div=voicemail#; then as each member of the huntgroup goes off duty they should divert there telephone to there own ext number *2*ownnumber# When everyone in the group is off duty (or on busy) the calls will go to voicemail.
Cheers
Right for the cdini, but the code for log-off isn't *2*[ownExt]# - it is *21*[ownExt]#..... and any divertion to any extension. For the GH is importent that the PBX understand that the extension has any type of divertion. => Function Key CAD
Bether than voice-mail on busy is, to divert to a group owerflow (voice-mail) or use the queue with text an music. It works very fine.
This is only a suggestion and not mandatory OK
C Ya soon
goa999
......
and thx for all answers and sorry for my bad english ;-)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.