Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CM new installation

Status
Not open for further replies.

Mohamed

IS-IT--Management
Dec 12, 2016
19
QA
Hi All,
I have plenty of experience with IP Office and CS1000 system but CM. Now we are in the state of migration to CM 7.
I have no idea how the infrastructure topology, etc.
Can anyone guide me to get steps into CM 7 for installation and configuration from the beginning?

Thanks
 
There are installation and admin manuals on the Avaya Support site but it requires you to at least have some basic knowledge of the system
Asking for basic installation and configuration steps is kinda pushing the limits of what this forum is intended for.

If you never dealt with this before you should get someone on the project that has experience in these setups to get it done right.
Otherwise I would at least expect you to have gone through the proper training on the products that are going to be implemented.

"Trying is the first step to failure..." - Homer
 
Like Janni78 said, if you have no experience with CM you can do more harm then good. IPO and CS1000 knowledge will not help you with
migrating to CM7. Getting a trained tech on-site to assist with the install would be money well spent.

Don't worry, be happy
 
Like the other guys said get a guy in and make sure they are have CM 7 install experience. Even experienced CM engineers can struggle with CM7 if they haven't been trained trust me i know.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top