Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CM 2 upgrade to CM 5 question
- Thread starter evoguy
- Start date
CM 5.2 just recently came out, I have installed it on a few systems already.
If you have an SSO login to the AVAYA download center, you can download the CM 5.2 ISO, and burn your own CD:
Mitch
AVAYA Certified Expert
If you have an SSO login to the AVAYA download center, you can download the CM 5.2 ISO, and burn your own CD:
Mitch
AVAYA Certified Expert
- Thread starter
- #3
If you have less than an 8300C card you'll have to upgrade it. 8300B and less won't take 5.x
- Stinney
Favorite all too common vendor responses: "We've never seen this issue before." AND "No one's ever wanted to use it like that before.
- Thread starter
- #5
the S8300B runs CM 5.2 just fine, but, only in "standard" memory model, it will not support "large" memory model, so it cannot be an LSP of an S8730 running CM 5.2, which only supports "large" memory model.
A standalone S8300B works fine for CM 5.2, I have it loaded on several of them already.
Mitch
AVAYA Certified Expert
A standalone S8300B works fine for CM 5.2, I have it loaded on several of them already.
Mitch
AVAYA Certified Expert
- Thread starter
- #8
- Thread starter
- #9
Yes, no problem evoguy. we have several setup that way.
eventually, the S8300B will have to be replaced with an S8300C (or the newer S8300D now), probably by CM 6 or beyond, they have not announced anything yet. for now the S8300B works, so why spend money upgrading it now, when it's not needed.
Mitch
AVAYA Certified Expert
eventually, the S8300B will have to be replaced with an S8300C (or the newer S8300D now), probably by CM 6 or beyond, they have not announced anything yet. for now the S8300B works, so why spend money upgrading it now, when it's not needed.
Mitch
AVAYA Certified Expert
Can I jump in on this - is there a specific path to go from CM2 to CM5 - do you have to go to 3 or 4 first ?
I'm doing one which is an S8300B on CM2.2 going to CM5.x, this will then be the main system with an S8300/G450 running as an LSP off it - will this work okay?
Can someone answer these 2 questions
Thanks!
I'm doing one which is an S8300B on CM2.2 going to CM5.x, this will then be the main system with an S8300/G450 running as an LSP off it - will this work okay?
Can someone answer these 2 questions
Thanks!
- Status
Similar threads
- Locked
- Question
- Locked
- Question