Option 61, running 25.40. I'm getting regular (every minute or so) DTA015 errors on my loop that is set to be the clock source. Every few minutes I'm getting DTC007 errors as well. I sent to telco first to test, but they reported no trouble found. The clocks look ok (below), but I'm not sure what to do next.
Site is medical, so I don't have luxury of playing around too much with the circuits or CC.
.ssck 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - DTI061
PREF - 30
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR
.ssck 1
ENBL
STANDBY
CLOCK CONTROLLER - DTI061
PREF - 30
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR
.lcnt
PRI TRK LOOP 28
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000
PRI TRK LOOP 29
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000
PRI TRK LOOP 30
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000
PRI TRK LOOP 31
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000
Site is medical, so I don't have luxury of playing around too much with the circuits or CC.
.ssck 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - DTI061
PREF - 30
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR
.ssck 1
ENBL
STANDBY
CLOCK CONTROLLER - DTI061
PREF - 30
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR
.lcnt
PRI TRK LOOP 28
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000
PRI TRK LOOP 29
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000
PRI TRK LOOP 30
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000
PRI TRK LOOP 31
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000