Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Clocking issues

Status
Not open for further replies.

lazycalm

Technical User
May 27, 2008
23
US
Option 61, running 25.40. I'm getting regular (every minute or so) DTA015 errors on my loop that is set to be the clock source. Every few minutes I'm getting DTC007 errors as well. I sent to telco first to test, but they reported no trouble found. The clocks look ok (below), but I'm not sure what to do next.
Site is medical, so I don't have luxury of playing around too much with the circuits or CC.


.ssck 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - DTI061
PREF - 30
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR
.ssck 1
ENBL
STANDBY
CLOCK CONTROLLER - DTI061
PREF - 30
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR


.lcnt

PRI TRK LOOP 28
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 29
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 30
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 31
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000



 
Check the status of your clocking (CC) cards and cables etc. Print off the history file to look what else has happened.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Checked clock status (above) and cables look fine. I tried to print the history, but the file was empty for some reason.
 
I will say though, that I've had a terminal session up for awhile and those are the only errors. It's been occurring for well over a month now, so anything that might have happened would no longer be in history anyway.
 
The clock listing above is not fine, you're not locked to the primary reference, you're in free-run and that's why you're getting the errors.

Type in TRCK PCK, to lock the clock to the primary ref.


ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - DTI061


DTI0061 Supposed to track on primary but hardware is free run.
 
Tried trck pck, but it just returned to the prompt, no response.

.trck pck

.ssck 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - DTI061
PREF - 30
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR
.
DTA015 30
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top