Clocking issues

[lazycalm]

Option 61, running 25.40. I'm getting regular (every minute or so) DTA015 errors on my loop that is set to be the clock source. Every few minutes I'm getting DTC007 errors as well. I sent to telco first to test, but they reported no trouble found. The clocks look ok (below), but I'm not sure what to do next.
Site is medical, so I don't have luxury of playing around too much with the circuits or CC.


.ssck 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - DTI061
PREF - 30
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR
.ssck 1
ENBL
STANDBY
CLOCK CONTROLLER - DTI061
PREF - 30
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR


.lcnt

PRI TRK LOOP 28
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 29
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 30
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 31
TRSH CNT:
BPV -000
SLIPD -131
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000

 

[Firebird Scrambler]

Check the status of your clocking (CC) cards and cables etc. Print off the history file to look what else has happened.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[lazycalm]

Checked clock status (above) and cables look fine. I tried to print the history, but the file was empty for some reason.

 

[lazycalm]

I will say though, that I've had a terminal session up for awhile and those are the only errors. It's been occurring for well over a month now, so anything that might have happened would no longer be in history anyway.

 

[RickyPone]

What is the nt number for the clock?

 

[yyrkroon]

The clock listing above is not fine, you're not locked to the primary reference, you're in free-run and that's why you're getting the errors.

Type in TRCK PCK, to lock the clock to the primary ref.


ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - DTI061


DTI0061 Supposed to track on primary but hardware is free run.

 

[lazycalm]

Tried trck pck, but it just returned to the prompt, no response.

.trck pck

.ssck 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - DTI061
PREF - 30
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR
.
DTA015 30

 

[NortelGuy1979]

You're going to need a maintenance window to reseat your clocks and check the cabling. The DTI061 needs to be cleared; you're not really clocking properly.

Matthew - Technical Support Engineer Sr.

http://www.linkedin.com/in/matty79

 

[RickyPone]

You might be able to force download the clocks.