Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CLID 2

Status
Not open for further replies.

carb11

Technical User
Apr 3, 2009
79
US
Hey all,

I have an outbound caller ID question.

We have a CS1K 7.5 and are currently using SIP trunking for outbound calls. The issue is our main number is being outpusled correctly but the individual name on the DN is being sent with it. We would like our company name sent instead of individual names.

Current caller ID shows:
Joe Blow
914-835-7000

We would like:
ABC Company
914-835-7000


Any ideas:

REQ: prt
TYPE: clid
CUST 0
SIZE 256
RNGE

INTL

ENTRY 0
HNTN 914
ESA_HLCL 835
ESA_INHN YES
ESA_APDN YES
HLCL 8357000
DIDN NO
DIDN_LEN 0
HLOC
LSC
CLASS_FMT DN
 
Easiest thing to due in that case is to have the carrier do it all

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
Agreed!!!

But having an issue with our carrier and would like to take them out of the mix.

How complicated is it to complete?

I thought DIDN set to no should do the trick

 
In LD 95 you can associate a name with a clid table


MEM AVAIL: (U/P): 98454042 USED U P: 4981700 216607 TOT: 103652349
DISK SPACE NEEDED: 304 KBYTES
REQ new
TYPE name
CUST 0
PAGE
DIG
DN
ENTR 0


NAME ABC Company
XPLN 24
DISPLAY_FMT FIRST,LAST
 
How are you sending out name information? I have a 1000M on 7.5 I dont have SIP to the CO just PRI
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top