Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CLI on outgoing SIP Calls

Status
Not open for further replies.

RavenAndy

Vendor
May 30, 2007
56
GB
Does anybody know how to get the outgoing CLI presented on a call made out via a sip trunk.
 
Set the Local URI to "USER DATA" and then set the SIP Name in the User tab for the CLI.

It will have to be allowed by your ITSP

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office


Fooball is not a matter of life and death-It is far more important!!!!
 
Or prog the sip number into the local URI field in the SIP trunk.

ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
ACI - IP Office Implement
 
Looks like an issue with my ITSP, if I set local URI to anything but "Use Authentication Name" the call is rejected by my ITSP.

Using voiceflex, anybody else using them and got around this problem?
 
Speak to the provider.

ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
ACI - IP Office Implement
 
Work with Richard at Voiceflex support. I'm sure with a little playing it can be sorted.

SIP is a pain in the arse. ISDN is SO much easier.

I haven't played with CLI and Voiceflex but have got it sorking with another provider.

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office


Fooball is not a matter of life and death-It is far more important!!!!
 
SIP is a pain in the arris, but as time goes on it will become easier as you get to grips with it a bit more.

One of my resellers has installed a SIP only site, loads of channels and numbers to rival a fairly hefty PRI circuit.

It seems to work well so far. At the moment im touching wood and he is nearly touching cloth in his undies but it looks good so far.

ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
ACI - IP Office Implement
 
We have installed a SIP only site. 8 trunks and 20 DDI's. Works ok. Only problem we have is porting thier C&W numbers from the old PRI circuit. Nobody seems to be able to port C&W numbers!!!!!

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office


Fooball is not a matter of life and death-It is far more important!!!!
 
Now thats a showstopper ok.

ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
ACI - IP Office Implement
 
With regards to C&W can you not port to BT first then onto your ITSP.

Pian but may get you there in the end
 
The numbers are on a BT PRI now. Bt won't even move them as they are moving to a different exchange area!!!!

Every Provider we try (SIP and ISDN) either hit a brick wall with the port or want silly money to install ISDN.


Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office


Fooball is not a matter of life and death-It is far more important!!!!
 
Voiceflex can do that.

ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
ACI - IP Office Implement
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top