Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CLI on analogue lines

Status
Not open for further replies.

kokolino23

Programmer
Oct 21, 2009
49
GB
Hello,
Can I ask if anyone knows how to enable CLIP on analogue lines, please?
TBH, I'm pretty sure I've got the right COS settings for both the trunk and handsets but still not working.
I've got the feeling is not even activated on the line but how can I prove that to the provider?
If I read the SMDR logs, the CLI isn't shown. I presume this should come up in there regardless if the COS has been configured corectly or not...
Many thanks
 
System Type?
Software Version?
Hardware type running analog phones?

**********************************************
What's most important is that you realise ... There is no spoon.
 
3300 CXi II on 5.0 SP2
The lines are configured to ring on IP handsets, not on analog phones. Just checked the line with a phone connected straight on it and the service is activated, I can see the CLI.
Still no luck on the controller though ?!
 
Is the CLASS option enabled in the Trunk Cct Descriptor

If not, I've found it takes a couple of calls for the system to learn once it's turned on.

If it is enabled then no idea.

**********************************************
What's most important is that you realise ... There is no spoon.
 
CLASS option IS enabled in the Trunk Cct Descriptor
I'd guess I have to log it with Mitel, see what they say
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top