dpoynter01
IS-IT--Management
Hello
I have a few questions about Cisco Call Manager 7.
I recently installed Call Manager 7 on a server to practice on. Our current setup uses Cisco 7940 Phones, however we use them on "3CX" as our PBX and the phones have the SIP protocol installed on them. We currently have a SIP Trunk service CallCentric.Com we plug this sip information from them into 3cx via the web gui set the phones to connect to the ip of the 3cx pbx and there ya have it. I've not had time to completely go through the Web GUI for CM7 but is this setup the same way or do I need another piece of hardward to make this work the same way? I know I'll have to switch back to the SCCP protocol on the phones, but I'm trying toget an idea of how this is setup. I plan to eventuall get certified. Any suggestions or help would be greatful.
DAn
I have a few questions about Cisco Call Manager 7.
I recently installed Call Manager 7 on a server to practice on. Our current setup uses Cisco 7940 Phones, however we use them on "3CX" as our PBX and the phones have the SIP protocol installed on them. We currently have a SIP Trunk service CallCentric.Com we plug this sip information from them into 3cx via the web gui set the phones to connect to the ip of the 3cx pbx and there ya have it. I've not had time to completely go through the Web GUI for CM7 but is this setup the same way or do I need another piece of hardward to make this work the same way? I know I'll have to switch back to the SCCP protocol on the phones, but I'm trying toget an idea of how this is setup. I plan to eventuall get certified. Any suggestions or help would be greatful.
DAn