Cisco 5330

[telnettech]

I have a Cisco AS5350XM Router running IOS 12.4.15T3 and added 6 PVDM-264 in a module. When i look at the show voice dsp active, i only see 48 DSP. I think there is something i am missing like some configuration. I have looked around google and dont seem to find anything that can help point me in the right direction to get the DSP to work. There is a DS 3 connected to it and what i am looking to do is go from SIP to ISDN and for the dsp to do transcoding from g729 for the DS3.


Can someone possibly point me in the right direction????


Thanks
Brian

To error is human.....if the machine doesnt work, then KICK IT !!!!!!!!!!!!!

 

[whykap]

Do you see the module in the hardware list?

 

[telnettech]

I dont see anything that stands out. If I recall, there is normally a module name in the show hardware command. See below the output.

Sprint5350# sho hardware
Cisco IOS Software, 5350 Software (C5350-JK9SU2_IVS-M), Version 12.4(15)T3, RELEASE SOFTWARE (fc1)
Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 25-Jan-08 01:17 by prod_rel_team

ROM: System Bootstrap, Version 12.3(12r)PI6b, RELEASE SOFTWARE (fc1)

Sprint5350 uptime is 4 hours, 32 minutes
System returned to ROM by power-on
System image file is "flash:c5350-jk9su2_ivs-mz.124-15.T3.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco AS5350XM (BCM) processor (revision 0x21) with 393215K/131072K bytes of memory.
Processor board ID
SB-1 CPU at 750MHz, Implementation 1025, Rev 0.3, 256KB L2 Cache
Last reset from power-on
Manufacture Cookie Info:
EEPROM Version 0x4, Board ID 0x4C3,
Board Hardware Version 2.7, Item Number 800-6571778-02,
Board Revision A0, Serial Number
Processor 0x0, MAC Address 0016.9d6e.e24e
2 Gigabit Ethernet interfaces
174 Serial interfaces
7 Channelized T1/PRI ports
1 Channelized T3 port
512K bytes of NVRAM.
125184K bytes of ATA External CompactFlash (Read/Write)

Configuration register is 0x2102

Sprint5350#


To error is human.....if the machine doesnt work, then KICK IT !!!!!!!!!!!!!

 

[whykap]

try this command:
show diag

Do you see your DSP module in there?

 

[telnettech]

whykap,

Yes I see them when i run the show diag command.

PVDM Slot 0:
64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision : 4.0
Part Number : 73-8541-05
Board Revision : A0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC103035BE
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : AS5X-PVDM2-64
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 EC 41 04 00 82 49 21 5D 05 42 41 30
0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 30 33 30
0x20: 33 35 42 45 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 8D 41 53 35 58 2D 50 56 44 4D 32 2D 36 34 89 56
0x40: 30 31 00 D9 02 40 C1 FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

PVDM Slot 1:
64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision : 4.0
Part Number : 73-8541-05
Board Revision : A0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC1030379R
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : AS5X-PVDM2-64
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 EC 41 04 00 82 49 21 5D 05 42 41 30
0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 30 33 30
0x20: 33 37 39 52 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 8D 41 53 35 58 2D 50 56 44 4D 32 2D 36 34 89 56
0x40: 30 31 00 D9 02 40 C1 FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

PVDM Slot 2:
64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision : 3.2
Part Number : 73-8541-04
Board Revision : A0
Deviation Number : 0
Fab Version : 03
PCB Serial Number : FOC09044PJG
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : PVDM2-64
Version Identifier : NA
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 EC 41 03 02 82 49 21 5D 04 42 41 30
0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 30 39 30 34
0x20: 34 50 4A 47 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 88 50 56 44 4D 32 2D 36 34 89 4E 41 20 20 D9 02
0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

PVDM Slot 3:
64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision : 3.2
Part Number : 73-8541-04
Board Revision : A0
Deviation Number : 0
Fab Version : 03
PCB Serial Number : FOC10111EJ7
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : PVDM2-64
Version Identifier : NA
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 EC 41 03 02 82 49 21 5D 04 42 41 30
0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 30 31 31
0x20: 31 45 4A 37 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 88 50 56 44 4D 32 2D 36 34 89 4E 41 20 20 D9 02
0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

PVDM Slot 4:
64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision : 4.0
Part Number : 73-8541-05
Board Revision : A0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC103612VD
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : AS5X-PVDM2-64
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 EC 41 04 00 82 49 21 5D 05 42 41 30
0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 30 33 36
0x20: 31 32 56 44 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 8D 41 53 35 58 2D 50 56 44 4D 32 2D 36 34 89 56
0x40: 30 31 00 D9 02 40 C1 FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

PVDM Slot 5:
64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision : 4.0
Part Number : 73-8541-05
Board Revision : A0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC1036121Z
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : AS5X-PVDM2-64
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 EC 41 04 00 82 49 21 5D 05 42 41 30
0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 30 33 36
0x20: 31 32 31 5A 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 8D 41 53 35 58 2D 50 56 44 4D 32 2D 36 34 89 56
0x40: 30 31 00 D9 02 40 C1 FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

When i do a show voice dsp active, I get the following output:

DSP DSP DSP Channel Call
DSP# State Complexity Resets State Type
1/1 ACTIVE FLEXI 0 ________ ________ ________ ________
1/2 ACTIVE FLEXI 0 ________ ________ ________ ________
1/3 ACTIVE FLEXI 0 ________ ________ ________ ________
1/4 ACTIVE FLEXI 0 ________ ________ ________ ________
1/5 ACTIVE FLEXI 0 ________ ________ ________ ________
1/6 ACTIVE FLEXI 0 ________ ________ ________ ________
1/7 ACTIVE FLEXI 0 ________ ________ ________ ________
1/8 ACTIVE FLEXI 0 ________ ________ ________ ________
1/9 ACTIVE FLEXI 0 ________ ________ ________ ________
1/10 ACTIVE FLEXI 0 ________ ________ ________ ________
1/11 ACTIVE FLEXI 0 ________ ________ ________ ________
1/12 ACTIVE FLEXI 0 ________ ________ ________ ________
1/13 ACTIVE FLEXI 0 ________ ________ ________ ________
1/14 ACTIVE FLEXI 0 ________ ________ ________ ________
1/15 ACTIVE FLEXI 0 ________ ________ ________ ________
1/16 ACTIVE FLEXI 0 ________ ________ ________ ________
1/17 ACTIVE FLEXI 0 ________ ________ ________ ________
1/18 ACTIVE FLEXI 0 ________ ________ ________ ________
1/19 ACTIVE FLEXI 0 ________ ________ ________ ________
1/20 ACTIVE FLEXI 0 ________ ________ ________ ________
1/21 ACTIVE FLEXI 0 ________ ________ ________ ________
1/22 ACTIVE FLEXI 0 ________ ________ ________ ________
1/23 ACTIVE FLEXI 0 ________ ________ ________ ________
1/24 ACTIVE FLEXI 0 ________ ________ ________ ________
2/1 ACTIVE FLEXI 0 ________ ________ ________ ________
2/2 ACTIVE FLEXI 0 ________ ________ ________ ________
2/3 ACTIVE FLEXI 0 ________ ________ ________ ________
2/4 ACTIVE FLEXI 0 ________ ________ ________ ________
2/5 ACTIVE FLEXI 0 ________ ________ ________ ________
2/6 ACTIVE FLEXI 0 ________ ________ ________ ________
2/7 ACTIVE FLEXI 0 ________ ________ ________ ________
2/8 ACTIVE FLEXI 0 ________ ________ ________ ________
2/9 ACTIVE FLEXI 0 ________ ________ ________ ________
2/10 ACTIVE FLEXI 0 ________ ________ ________ ________
2/11 ACTIVE FLEXI 0 ________ ________ ________ ________
2/12 ACTIVE FLEXI 0 ________ ________ ________ ________
2/13 ACTIVE FLEXI 0 ________ ________ ________ ________
2/14 ACTIVE FLEXI 0 ________ ________ ________ ________
2/15 ACTIVE FLEXI 0 ________ ________ ________ ________
2/16 ACTIVE FLEXI 0 ________ ________ ________ ________
2/17 ACTIVE FLEXI 0 ________ ________ ________ ________
2/18 ACTIVE FLEXI 0 ________ ________ ________ ________
2/19 ACTIVE FLEXI 0 ________ ________ ________ ________
2/20 ACTIVE FLEXI 0 ________ ________ ________ ________
2/21 ACTIVE FLEXI 0 ________ ________ ________ ________
2/22 ACTIVE FLEXI 0 ________ ________ ________ ________
2/23 ACTIVE FLEXI 0 ________ ________ ________ ________
2/24 ACTIVE FLEXI 0 ________ ________ ________ ________


So as you can see, it appears that there is only 48 DSP when there should be like 360+ DSP at the G711 codec.



To error is human.....if the machine doesnt work, then KICK IT !!!!!!!!!!!!!

 

[whykap]

all that means is that you are using 48 DSP resources. Rest are unassgined?
Do you have 48 channels used for voice PRIs?
Or perhaps you need to add the rest to your DSP farm.

 

[telnettech]

Right....But as you can see, I dont see the hardware at all. I cant create a DSP farm unless the device sees the hardware. I have shutdown the router and reseated the DSP and the module to no avail. I do see this in the Show Run command that has nothing with it and have placed them into a dsp farm but still dont see them when i do the show voice dsp command


voice-card 1
dsp services dspfarm
!
voice-card 2
dsp services dspfarm
!
voice-card 3
dsp services dspfarm


I assumed that these were the extra dsp added to the router by the module but they dont seem to show up....maybe I am missing something in the config to get them installed and configured.



To error is human.....if the machine doesnt work, then KICK IT !!!!!!!!!!!!!

 

[whykap]

Since you need to use them for transcoding, you need to add a transcoding specific dsp resource, then register it to where you need to use it.
Assuming there is not a cisco call manager in the picture, you will need to register the DSP resources on the cube itself.

So yes you are missing quite a bit of configuration to get this working properly.

Look up configuring transcoding resources on a cisco CUBE.

 

[whykap]

here is a start

http://www.cisco.com/en/US/products...s_configuration_example09186a008092d6b3.shtml

 

[telnettech]

Ok next question. We are not using CUBE. So is the configuration the same????


Even though we are not using SCCP, do I associate the SSCP application to the profile?????


Still not fully clear on that part

To error is human.....if the machine doesnt work, then KICK IT !!!!!!!!!!!!!

 

[burtsbees]

card type?

router(config)#card type t1 0 0
router(config)#card type t1 0 1

and so on, something like that.

Just a guess...

ip access-list extended IP-Options-and-Powerball
deny ip any any winning-powerball-ticket
permit ip any any option any-options
!
class-map ACL-Options-and-Powerball
match access-group name IP-Options-and-Powerball
!
policy-map CoPP-POLICY
class ACL-Options-and-Powerball
drop
!
control-plane
service-policy input CoPP-POLICY

 

[whykap]

yes and would you add it through telephony services and assign an sdpfarm with trancscoders. it's in the doc I attached and very well explained