JonathanBKNY
Technical User
- Apr 28, 2008
- 30
Hello everyone.
Im having an issue here. I have connected 3 routers together for some basic router simulations to work on my CCENT cert.
I have 3 2505's all running the same ver of IOS (c2500-is-l.123-12) Router 1 is connected on both s1 & s2 interfaces to the s0 of the other 2 2505's. I have connectivity from router 1 to router 2&3 and from router 2 to router 1. I also get connectivity from router 3 to router 1 but I cannot ping or telnet to router 2. The protocol on s1 of router 1 keeps dropping. I have tried so many things.I have toggled shutting the port on and off and the protocol comes up for a few seconds but then goes away again... Im lost.
Any suggestions.
Im having an issue here. I have connected 3 routers together for some basic router simulations to work on my CCENT cert.
I have 3 2505's all running the same ver of IOS (c2500-is-l.123-12) Router 1 is connected on both s1 & s2 interfaces to the s0 of the other 2 2505's. I have connectivity from router 1 to router 2&3 and from router 2 to router 1. I also get connectivity from router 3 to router 1 but I cannot ping or telnet to router 2. The protocol on s1 of router 1 keeps dropping. I have tried so many things.I have toggled shutting the port on and off and the protocol comes up for a few seconds but then goes away again... Im lost.
Any suggestions.