CICS Paging 2

[BR8770]

Folks, I have a CICS w/7.1 s/w
want to use external paging and it worked on the old cabinet, which I replaced due to water damage.
tried prs 24 & 25 the breakout on the AMP where the trunks reside; nothing
sets are programmed for paging (Y)

result: I can't get anything out of the cabinet by using F62; F61 works ok for the phones with a tone burst; tried F60 "Speakers" and "all" as well; I had a butt set listening @the page port...nothing...
I am missing something here......?

Suggestions please?

 

[exsmogger]

Pair 25 is the paging audio pair. Pair 24 is the paging relay pair (if needed). All I can suggest is to recheck your wiring.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[norstarboy125]

If you put your butt set on the violet/slate pair of the trunk amp cable and hit feature 62 from a phone and didn't get anything then you have a bad page port.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[BR8770]

Guys, kinda what I figured too; however, there is s 24vdc Bogen power supply that was unhooked; I might try setting it on pr 24 and see if I get an audio linkup on 25; I am still trying to find the paging amp too; but having no audio at all on 25 scares me.

 

[exsmogger]

If there's a 24vdc power supply then most likely there's a self-amplified speaker that doesn't require an amplifier. These kinds of speakers are polarity sensitive on the power connection. I forgot to mention checking the amphenol to make sure it's fully seated.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[BR8770]

Hey Brian, I figured the same about a powered stand-alond speaker as well, and there may be one there, but I know there is a separate 100w amp w/70v line somewhere in the building too....I reseated the amphenol connector last nite...tonite I am going to pull it out completely and see if there are any bent pins or bad connections.....thnaks big guy!

 

[BR8770]

Hey guys, thought I'd let you know it AWS an open pair on the Amphenol plug; thansks for the help!