CICS 7.0

[silver987]

CICS 7.0 I tried to add a second KIM but the system will not let me add more than one in programing. I phyiscally installed the second one anyway and it seems to work ok, is this normal?

Wayne T

 

[clidpri]

are you saying you cant assign as a CAP

 

[silver987]

It will only allow me to assign 1 CAP/KIM.

Wayne T

 

[clidpri]

the only thing i think of trying power down and bkup
or there maybe something worng with the KIM
i never done any sys with 7.0 for some reason those ver. that have the .0 suck. i stay away from them.
like 4.0, 5.0, 6.0 etc.

If you arent going to move line buttons or use swca
i see no reason to set as a KIM

 

[RikRodgers]

7.0 has worked fine for me. I'll have to check the manual, but I'm thinking 1 CAP was standard for the CICS. (I just installed one with 7.1 yesterday, and I only had an option for 1 CAP, too.)

That doesn't mean you couldn't install kim's on every phone, just that you can only assign one as a central answering position.

 

[clidpri]

this is right off the cd

This setting designates a telephone as an enhanced central answering
position (eCAP). The default assignment is None. The system can support a maximum of one eCAP.


if they only read the manuals

thats why i did not know till i looked, because i have never assigned a capper on a simple CICS system

 

[silver987]

Me To!! I have never had anyone ask for more than 1 KIM on a CICS.

Wayne T