Changing Provider

[felon]

We are changing providers and the new carrier wants to know the following:

Line Coding -
Line Frame -
Digit Outpulse -
Protocol -

We are currently using ISDN PRI's with Sprint. Anyone know off hand what LD's I can find this info in ?

Thanks

 

[johnpoole]

ld 22
prt cequ

will get you most of that, your running b8zs, esf, the digits refer to the number of digits you want from the office, if your using 4 digit ext, that's the answer, and your protocol will be sl1.. you'll need to know their switch type and release, and protocol. if those don't match your current provider you'll need to out your pri's and rebuild them

john poole
bellsouth business
columbia,sc

 

[felon]

Thanks, that's great.

One additional question:

Sprint was using a Lucent Switch and our new provider is using an DMS 500. In what load do you find the difference or do you have an example of building a trunk?

Thanks

 

[johnpoole]

the trunks will be the same, but you'll need to out then, out the route, out the d and put the d back in, here is one of my d's that interfaces to the same switch


ADAN DCH 44
CTYP MSDL
GRP 2
DNUM 14
PORT 3
DES SENATE44
USR PRI
DCHL 44
OTBF 31
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC D100
SIDE USR
CNEG 1
RLS ID 33
RCAP ND2
MBGA NO
OVLR NO
OVLS NO
PRI INTERFACE ID
045 2
017 3
018 4
T200 3
T203 10
N200 3
N201 260
K 7


john poole
bellsouth business
columbia,sc

 

[felon]

what LD did you print this from?

Thanks

 

[johnpoole]

you build adan in 17 and print them in 22..


john poole
bellsouth business
columbia,sc

 

[felon]

That's great, thanks John.

A couple of more questions:

You say I will need to out the trunks, route and D channels,

I will out the trunks in LD 14 and rebuild there?

I will out the routes in in LD 16 and rebuild there?

I will out the DCH in LD 17 and rebuild there?

Is this Correct? If so, do you have any suggested configs for each to talk to a dms500?

Thanks

 

[johnpoole]

yes that is correct, here is a route back to a 250, which is the same switch


TYPE RDB
CUST 00
ROUT 156
DES BSLD
TKTP DID
M911_ANI NO
M911_TONE NO
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC D250
SBN NO
PNI 00000
NCNA YES
NCRD NO
CHTY BCH
ISAR NO
CPUB OFF
DAPC NO
BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 8280
TCPP NO
PII NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC YES
DCNO 1 *
NDNO 1
DEXT NO
DNAM NO
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
NBS 2048
NBL 4096



PAGE 002

IENB 5
VSS 0
VGD 6
DRNG NO
CDR YES
INC YES
LAST YES
QREC YES
OAL YES
AIA YES
OAN YES
OPD YES
CDRX NO

SCH2017

NATL NO
TDG
VRAT NO
MUS NO
RACD NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
TDET NO
TTBL 0
ATAN NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
AACR NO

here is one for the trunks


DES BSLD
TN 156 01
TYPE DID
CDEN SD
CUST 0
TRK PRI
PDCA 1
PCML MU
NCOS 1
RTMB 156 1
B-CHANNEL SIGNALING
NITE
STRI/STRO OWK OWK
AST NO
IAPG 0
CLS UNR DTN WTA LPR APN THFD HKD
P10 VNL
TKID


john poole
bellsouth business
columbia,sc

 

[hawks]

If you are running NI2 then should not have to make any changes. That is if the 500 does NI2.

 

[felon]

We are running Ni1. The powers that be were too cheap to upgrade to rel25.

So, I have no choice. Thanx.

 

[johnpoole]

you can no longer upgrade to any rls before 4.0, your rls will no longer be supported sometime this coming year, maybe the power will get off of a dollar then, have the same trouble here, 3 million to upgrade the network, but why spend money on the voice side, they never break.. not a new story, just more of the same

john poole
bellsouth business
columbia,sc

 

[hawks]

I know the feeling..............NI2 is package 291 it came out in RLS 21 I think.