Changing PBX time with NTP enabled 1

[drew31fan]

I am trying to change time in a CS1000 that has NTP enabled. I tried to go into LD 117 and disable NTP but the PBX won't allow it. Any suggestions?

 

[marcuspb]

If it's a CO-RES Sig server/call server you have to change it in Linux.

 

[janaya]

There are other things you need to do. I think you need to disable NTP Background, or something like that. I don't know right off the top of my head, but if you want to manually sync, you have a couple steps.

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/Edit

 

[dabble]

YOu have to stop NTP background, then disable NTP, then do your changes then enable NTP.

LD 117
=> stop ntp background
NTP query is being processed.
Do you want to proceed (y/n)? [y]
NTP Background process is aborted.

=> dis ntp
NTP feature is disabled

Then do a stat ntp to see if NTP status is disabled.


Then you can do your changes.

I had to change the utcoffset from -5:00 to -4:00

=> chg utcoffset -4 00
UTC offset is set to -4:00


=> enl ntp
NTP is running in CS mode.
Mode of security for Primary:INSECURE
Mode of security for Secondary:INSECURE
NTP feature is enabled.

Then I did a sync manual


=> sync ntp manual
Trying 10.0.30.6......Please do not abort from overlay till sync operation is ex
ecuted
NTP is not running in secured mode
" ERR0061": Delta between server clock and system clock exceeds the critical thr
eshold level.

NTP Server Time is 08:51:43 on 11-3-2013
Do you want to update the time (y/n)? [n]y

=>
Updated Call Server Time to 08:52:00 on 11-3-2013

and it updated the time for me.