Change what is displayed on digital equipment

[pettsson]

Is there any way to change what information is displayed in the display of digital equipment? For example, I have a Dialog 3212 which now shows:
17:11 Apr07 2003
317

I want to be able to choose what is shown in this window of the equipment. One thing might be to see last called number.

 

[pettsson]

Also, I'm not IS/IT Management. I chose the wrong line. How do I change it?

 

[mdfan]

Do you mean changing dateformat or time as pm/am instead of 24h ?

 

[pettsson]

No, the date is fine. I want to display more info in the window. On the second line, where it only says "317" (my extension) now, I would like it to say for example "[last called number] 317". Can I somehow set what info is shown in the window?

 

[mdfan]

For Date format , use ASPACARNUM=62,PARVAL=0 or 1
where 0 means DDMMYY and 1 means MMDDYY.

For Time format , use ASPACARNUM=101,PARVAL=0 or 1
where 0 means 12 hours clock and 1 means 24 hours clock.

 

[mdfan]

Last called number is not displayed in the window, it may redialled by using ***.
You may put your name in front of the number 317.

 

[pettsson]

Ok, how do I do that?

 

[mdfan]

Name is given by NIINIIR=317,NAME1="Mr",NAME2="PETTSON",NAMDB=YES;

The NAMDB=YES puts the name into a directory database which may be searched through by pushing putton to the right under the display.

 

[pettsson]

Thank you!

 

[Isinor]

Hi

You can also change the IDLE state text with KSTSC command. IDLE1 is for digital phones with a 3 line display and IDL12 is for phone with a 2 line display. This would normaly display the company name etc since this is system wide.

To Print the IDLE State text…
KSTSP:STRNO=IDL1&&IDL15;

To Change…
KSTSC:STRNO=IDL1,STRING=”Hello World”;

Note the MD has a default LANG, you can change the LANG for an extension (EXCAC etc) or switch the system default via ASPAC.