I found an old thread listing the commands to view and set time in a Nortel Meridian phone switch but I can't seem to find anything about the syntax and I'm having trouble changing the time.
LD 2
TTAD : lists date/time
STAD : sets the date/time
If I mirror the output of TTAD (DAY DD MM YYYY HH MM SS) and press "Enter," the console spits out about 20 "TFC200" and "TFC0000" messages, and the time doesn't change.
Thanks for the help.
LD 2
TTAD : lists date/time
STAD : sets the date/time
If I mirror the output of TTAD (DAY DD MM YYYY HH MM SS) and press "Enter," the console spits out about 20 "TFC200" and "TFC0000" messages, and the time doesn't change.
Thanks for the help.