Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Change PIN on VM Pro Conference Bridge 1

Status
Not open for further replies.

tidypants

Technical User
Feb 8, 2010
326
GB
Hi,

I'm looking for a way for a user to change the PIN on a simple conference bridge which uses conference meet me.

Start point -----> transfer (conference meet me number)

The client wants to keep exisiting bridge numbers and not go with personnal bridge numbers on 8.1 which i know how to change PIN codes on.

IPO: 8.1.61
VM PRO: 8.1

 
I would use user variables for this, though I recall someone doing this recently had trouble with it, still worth a bash though :)


Avaya Implementation Qualified Professional Specialist Technical Engineer (AIQPSTE)
 
Ok, could you explain a little deeper into how this would get implemented?

Thanks
 
If you look at the VM Pro examples it covers setting and testing user variables, if I remember correctly :)


Avaya Implementation Qualified Professional Specialist Technical Engineer (AIQPSTE)
 
Had a look on Exmaples it explains how it is used however not sure how this would work in the design im looking for?
 
You can set the variables to anything alphanumeric, even a PIN. So create a module they dial into to set the PIN or give them a hidden option in the existing module to do this. Then test the caller entered PIN ($KEY) against the variable :)


Avaya Implementation Qualified Professional Specialist Technical Engineer (AIQPSTE)
 
Thanks for this, don't suppose you have this on VM Pro already so i can glance my eyes over it, as im unsure into how this will work?

Thanks again
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top