Change PIN on VM Pro Conference Bridge 1

[tidypants]

Hi,

I'm looking for a way for a user to change the PIN on a simple conference bridge which uses conference meet me.

Start point -----> transfer (conference meet me number)

The client wants to keep exisiting bridge numbers and not go with personnal bridge numbers on 8.1 which i know how to change PIN codes on.

IPO: 8.1.61
VM PRO: 8.1

 

[amriddle01]

I would use user variables for this, though I recall someone doing this recently had trouble with it, still worth a bash though


Avaya Implementation Qualified Professional Specialist Technical Engineer (AIQPSTE)

 

[tidypants]

Ok, could you explain a little deeper into how this would get implemented?

Thanks

 

[amriddle01]

If you look at the VM Pro examples it covers setting and testing user variables, if I remember correctly


Avaya Implementation Qualified Professional Specialist Technical Engineer (AIQPSTE)

 

[tidypants]

Had a look on Exmaples it explains how it is used however not sure how this would work in the design im looking for?

 

[amriddle01]

You can set the variables to anything alphanumeric, even a PIN. So create a module they dial into to set the PIN or give them a hidden option in the existing module to do this. Then test the caller entered PIN ($KEY) against the variable


Avaya Implementation Qualified Professional Specialist Technical Engineer (AIQPSTE)

 

[tidypants]

Thanks for this, don't suppose you have this on VM Pro already so i can glance my eyes over it, as im unsure into how this will work?

Thanks again

 

[tidypants]

All good on this now, thanks for your help