Change number of rings HP4K, V6 1

[favtech1]

What is command to lengthen ring time, i.e., change from 4 to 6 rings before fwd to voicemail.
Also, can this be done per phone, or strictly system setting?

 

[sbcsu]

System setting is in CTIME
DIS-CTIME:CP1
ANSADV / AnswerAdvance is the timer in seconds

For individual it is in ACTDA
CHA-ACTDA:STN
There is a value in there to do with individual forwardings

If any problems let me know

 

[donb01]

Wait... Are you saying it's now possible to override the number of rings before transfer on an INDIVIDUAL basis?? If so that will solve a bunch of problems I've been having for years! That has always been a system-wide parameter for me in the past (9006). Company policy is 3 rings or less, but I lied way back when I first installed the 9006 and told them it couldn't be set less than 4. I could be on the other side of the room from my office and can't get back there and grab my phone in 3 rings - it takes 1 ring just to realize where it's coming from unless you use distinctive ringing...

 

[favtech1]

Ok, just changed the sys time; works great. Fyi, changed fr 13 secs to 16 and got 1 more ring. Thx.

 

[donb01]

It has been my experience that a typical ring cycle is about 4 seconds. When I first learned it I was told it was 5 seconds, but 4 seems more accurate since I've been working with the 4K.