CFU issue

[olivarr]

Hi Moriendi,

Good Day

I would like to ask for your help regarding my issue in CFU in an External call, I configured an Analog dummy Ext # 28500 and used the CFU to external # 90905XXXXXXX, I tried calling locally my dummy EXT # 28500 and it gave a busy tone while calling the Dummy Ext # 28500 from another node it's working.

Regards

 

[Moriendi]

You didn't set the forward ITYPE as external did you, because you were forwarding to external? Int/Ext is the incoming call, not the outgoing, so you want GEN for both internal and external. If you set EXT, then only external calls will forward to that destination, and you can use INT to set a different (or same) destination for internal calls.

If you did set ZIEL FWD ITYPE GEN, please post
dis-aps:,psgl,y*;
reg-scsu:28500;
reg-ziel:fwd,28500;
reg-actda:stn,28500;
The COS contents used by 28500.

 

[olivarr]

Hi Moriendi,

here's below my display

<dis-actda
TYPE = stn
STNO = 28500
DIS-ACTDA:STN,28500;
H500: AMO ACTDA STARTED

+------------------------------------------------------------------------------+
| STATION NUMBER 28500 |
+------------------------------------------------------------------------------+
| DIVERSION: |
| DESTINATION NUMBER | CFVAR | DTYPE | ITYPE | SI |
| | | | | |
| 9090XXXXXXXX | STATIONV | CFU | GEN | VCE |
| VARIABLE RING TIME: 0 |
+------------------------------------------------------------------------------+
| INDIVIDUAL TIMERS FOR CIRCUIT AND OSMO USERS |
| FORWARD TO VOICE MAIL : 0 |
| CLIENT RING DURATION : 0 |
| DESK RING DURATION : 0 |
| CELL RING DURATION : 0 |
+------------------------------------------------------------------------------+
+------------------------+----------+----------+----------+--------+---------+

DIS-ZIEL:FWD,28500,9090XXXXXXXX,CFU,GEN,STATION;

<dis-scsu:28500,all;
DIS-SCSU:28500,ALL;
H500: AMO SCSU STARTED

------------------------------- USER DATA -----------------------------------
STNO =28500 COS1 =2 DPLN =0 SPDI =0
PEN = 1- 3- 6- 11 COS2 =2 ITR =0 SPDC1 =
DVCFIG =ANATE LCOSV1 =20 COSX =0 SPDC2 =
INS =YES LCOSV2 =20 RCBKB =NO
PMIDX =0 ALARMNO =0 LCOSD1 =29 HMUSIC =0 RCBKNA =NO
SSTNO =NO COTRACE =NO LCOSD2 =29 SPEC =
COFIDX =0 DIAL =VAR PULSTYPE= PULSLEV=
CCTIDX =3 ACKST = TEXTSEL=ENGLISH
DHPAR = NEONMWI=
CONN =DIR FLASH =YES DTMFBLK =NO WITKEY :NO
------------------- ACTIVATION IDENTIFIERS FOR FEATURES ---------------------
DND :NO CWT :NO
HTOS :NO HTOF :NO HTOD :NO VCP :NO
--------------------- FEATURES AND GROUP MEMBERSHIPS ------------------------
PUGR : HUNTING GROUP : NO
NIGHT OPTION : NO
------------------------- STATION ATTRIBUTES (AMO SDAT) ---------------------