CDR thru C-lan remote port...

[isaacman]

I'm using microcall for CDR. When i check the status it comes up REJECTED NOT A CALL RECORED. On the PBX side of it the CDR link is up.. I'm using remote port 5101. I try different remote port ,but the only one that I can get it is port 5101 ,but the only thing is that on the far end it comes up call rejected...

Have anybody experience this problem...

I'm for sure that is more like the remote port.....

Any ideas..........

 

[Ronster]

Do you know the format of the CDR record expected by microcll? If it is rejecting the data, may not be the correct format.

change system-parameters cdr



Ronster

 

[isaacman]

This is what i'm using.. For the microcall i should be using expanded.. I also try customize ,but that did not work..


Node Number (Local PBX ID): 1 CDR Date Format: month/day
Primary Output Format: expanded Primary Output Endpoint: CDR1
Secondary Output Format:
Use ISDN Layouts? n
Use Enhanced Formats? n Condition Code 'T' For Redirected Calls? n
Modified Circuit ID Display? n Remove # From Called Number? n
Record Outgoing Calls Only? n Intra-switch CDR? y
Suppress CDR for Ineffective Call Attempts? y Outg Trk Call Splitting? y
Disconnect Information in Place of FRL? n Outg Attd Call Record? y
Interworking Feat-flag? n
Force Entry of Acct Code for Calls Marked on Toll Analysis Form? n
Calls to Hunt Group - Record: member-ext
Record Called Vector Directory Number Instead of Group or Member? n
Record Agent ID on Incoming? n Record Agent ID on Outgoing? y
Inc Trk Call Splitting? y Inc Attd Call Record? n
Record Non-Call-Assoc TSC? n
Record Call-Assoc TSC? n Digits to Record for Outgoing Calls: dialed
Privacy - Digits to Hide: 0 CDR Account Code Length: 15