I have an Option 11 that I have "front ended" with another switch. I have a trunk route that is two T1's connecting the two switches. The option 11 has analog trunks in another route that all outbound traffic is routed on. When a station on the 11 dials an extension in the other switch it is routed over the T1 route.
I have CDR set the exact same on both routes. I get CDR output on the CTY port for any call on the T1 route but no output on the local analog trunk route.
Any ideas?
Thanks in advance
I have CDR set the exact same on both routes. I get CDR output on the CTY port for any call on the T1 route but no output on the local analog trunk route.
Any ideas?
Thanks in advance