Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CCSA and 911?

Status
Not open for further replies.

hawks

IS-IT--Management
Oct 9, 2002
5,869
US
what's a quick and easy way to allow 911 for someone using CCSA. It's a Hotel and right now the CDB is set for FRE2 when CCSA is on which blocks everything. they want to allow 911 and internal only but block all others calls. I was going to look at trying FR1 but wasn't sure is I still nedd to change in LD 90 so they could not call local.
 
Sorry yes the esa is built and 911 will go but I missunderstood them they also want 9,911 to go and that's what's not working.
 
You may need to build a RLI for the 9 911 calls. You will need to build an SPN for 911 and point it to the RLI you build. You will need to build a DMI table also and set it to delete 0 and add 0 and put that DMI in the RLI you build for 9 911. Below is our set up for dialing 9 911. This is with the assumption that the ESA is built, as you stated. The LTER tells he system it is a local termination and it looks to the ESA table for routing.

RLI 8
ELC NO
ENTR 0
LTER YES
CONA NO
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
FRL 0
[highlight #FCE94F]DMI 8[/highlight][highlight #FCE94F][/highlight]
CTBL 0
FCI 0
FSNI 0
SBOC NRR
IDBB DBD
IOHQ NO
ISET 0
NALT 5
MFRL 0
OVLL 0

SPN 911
FLEN 0
INPL NO
CLTP NONE
[highlight #FCE94F]RLI 8[/highlight]
SDRR NONE
ITEI NONE
 
pacat I tried that but as long as the console has CCSA avativated for a set then the set can not call anything except extensions. Right now the CCSA is using FRE2, I was hoping to use something less restricted. Looks like the only option is to rebuild the NCOS and assign one that would only allow 911. But I was hoping not to have to go that route because this place has FRL's all over the place.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top