Carrier Remote - t1 latency

[nhphoneguy]

does anyone know a way around the latency restrictions on a carrier remote? It comes up fine when the tested latency on the DS1 circuit is under 45 ms, but when the latency changes to 52 ms due to the carrier topology changing, the XPEC can not be enabled. Wondering if there is a patch for this?

 

[johnpoole]

don't know where you could address that problem,, what rls are you on.. if you have a site monotor such as seb you could script the error code aas a target.. you could script that in aspect quicker, but i don't think a background running in procomm full time is that easy to maintain, unless your willing to assign a full time serial port to that.



john poole
bellsouth business
columbia,sc

 

[nhphoneguy]

Hi John- did you reply to the wrong post?