can't turn on D-channel messaging 1

[jadiutori]

Hi All,

See my config below. For some reason I cant get the D-channel messaging to show up on the screen. As far as I know, the config below is correct. Any suggestions would be appreciated.

Thanks - Joe



stat mon
TRACE OUTPUT
DCH LOG : ON /U/TRACE/DCH.LOG
DCH TTY : ON
ACTIVE TRACES
DCH 010 : MSGI - ENBL MSGO - ENBL (UIPE)
DCH 015 : MSGI - ENBL MSGO - ENBL

 

[bhassell2000]

do yuou have MTC on the TTY you are logged in to?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[fritzthecat]

Hello,

you need to have bug under alarm in LD 17 enabled and also on your tty, then try in LD96 rst mon
then enl mon tty
this should work

regards
Fritz

 

[jadiutori]

It's working now. I think "rst mon" fixed it. I should have stated that it was working at one point and then all of a sudden stopped working. It's working now after I entered "rst mon" in LD 96. Thank you Fritz.