Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't send mail outside 2

Status
Not open for further replies.

ilceres

Technical User
Nov 2, 2005
88
IT
Hi to all
I'm new with E2K7, it look like very different from E2K3.

After new installation I simply can't send out email from SMTP connector (send connector in 2007) - the messages rest in queue with no error in log

I verified that DNS resolution and internet connectivity are ok.
Also i tryed to send a message from telnet connection: after the command MAIL FROM I receive the message: "530 5.7.1 Client was not authenticated"

Were I can check AUTH parameters?

thank you all
 
Set-ReceiveConnector -Identity "Default <ServerName>" -PermissionsGroup "AnonymousUsers
 
Actually, you need to include all the options you want, or you'll break it in other ways:

set-ReceiveConnector "Default servername" -permissiongroups "ExchangeUsers,ExchangeServers,ExchangeLegacyServers,AnonymousUsers"

Pat Richard
Microsoft Exchange MVP
 
Thank you all.
About this... how is the auth sintax for test via telnet? If is possible of course...

 
telnet mailserver 25
helo myname.com
mail from: testaccount@home.com
rcpt to: youraccount@yourdomain.com
DATA
subject: This is a test
Hi
.

The rcpt to line needs to be a valid Exchange account! You'll need to check the connector properties allow telnet initiation from the box you are using.
 
Hi Zelandakh, I arleady know the basic SMTP cmd you suggest, but without check "Anonimous Users" i receive the message:

530 5.7.1 Client was not authenticated

maybe there are some others SMTP cmd to authenticate in telnet session....

tks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top