dmagnerdds
IS-IT--Management
using aloha ver v5.2.8.224
was on an nt system. The hard drive crashed.
When i opened the computer there were two drives. C&D
Luckily the drive D had all the restaurant data.
the front office is running on emergency mode. i now have aloha manager running on the back office. my problem is i cant get the front to get off of the emergency mode and recognise the fileserver. ive read all of the posts on this forum about the file server issues and i have followed them and still have no luck.
my question is how does the workstations recognise the server. what program is supposed to be running on the server that the workstations see? CTLSERVER is running on the server but i am doing something wrong. the dongle is working properly. i found a driver for the card. do i need an updated version of ctlserver? the edc seems to be working i can settle the batch at the end of the day from the server. since i am starting from scratch and i dont have the aloha cd how do i know that everything is fine..
another question. how do i define the environment variable for the file server? where is this done?
i know nothing about aloha. my first experience with this program was two days ago. the permissions are correct. the workstations when i map them to drive z as soon as they are restarted they default back to the local workstation on the emergency mode. what program is running that makes them do this?
ive followed all of the suggestions in the forum. the only thing i cant seem to implement is the environment variables. where is this done and what are the settings i use?
in aloha manager under utility there is a setting that says recover file server. when i click this NOTHING happens. what is supposed to happen? please guys any and all help will be greatly appreciated.
was on an nt system. The hard drive crashed.
When i opened the computer there were two drives. C&D
Luckily the drive D had all the restaurant data.
the front office is running on emergency mode. i now have aloha manager running on the back office. my problem is i cant get the front to get off of the emergency mode and recognise the fileserver. ive read all of the posts on this forum about the file server issues and i have followed them and still have no luck.
my question is how does the workstations recognise the server. what program is supposed to be running on the server that the workstations see? CTLSERVER is running on the server but i am doing something wrong. the dongle is working properly. i found a driver for the card. do i need an updated version of ctlserver? the edc seems to be working i can settle the batch at the end of the day from the server. since i am starting from scratch and i dont have the aloha cd how do i know that everything is fine..
another question. how do i define the environment variable for the file server? where is this done?
i know nothing about aloha. my first experience with this program was two days ago. the permissions are correct. the workstations when i map them to drive z as soon as they are restarted they default back to the local workstation on the emergency mode. what program is running that makes them do this?
ive followed all of the suggestions in the forum. the only thing i cant seem to implement is the environment variables. where is this done and what are the settings i use?
in aloha manager under utility there is a setting that says recover file server. when i click this NOTHING happens. what is supposed to happen? please guys any and all help will be greatly appreciated.