Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't change AC2 - ESN028

Status
Not open for further replies.

gv82

IS-IT--Management
Apr 12, 2007
80
I need to change AC2 from '6' to '8'. I also have to change the CallPilot CDN from 8000 to 6000, but I think I have figured out how I'll be able to do that piece.

When I try to remove ac2 (ld 86, chg, esn, ac2 XX) I get ESN028. If I delete ac2 on element manager it is still there when I do prt esn.

I have quite a few LOC entries built under ac2 (and don't want to delete and rebuild them), is this my problem?

Thanks
 
Well you have 2 things fighting each other. You can not change AC2 to 8 until you have removed CDN 8000. This is a dialing conflict between 2 different DN types.

Change it to a 4 digit number and out and rebuild the call pilot cdn and then change it to a 8. Not looking up your error that is what I see right off.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.
 
I found the error message in the 4.5 I/O system messages doc.

ESN0028: Network translators, route list blocks, digit manipulation tables, FCAS tables,
or CDP list still exist; cannot remove.

Looks like I can't simply remove ac2, change CallPilot and then make ac2 '8'. Well, that is if I don't want to blow away everything configured under ac2. Am I interpreting this correctly?

I guess I need to change ac2 to something else (ex. 66), move CallPilot to 6000 and then make ac2 '8'. I'm sure it will be as easy as it sounds :)

Comments, suggestions?

Thanks!
 
No once it is programmed you can not remove it you must change it.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top