Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cannot add a MC32S card to a CS1000 R5.5 with SSC processor

Status
Not open for further replies.

Brian2014

Technical User
Jan 28, 2014
5
CA
have a CS1000 R5.5 SSC processor and trying to add a new MC32S card and when I get to XTRK is input M32S and this get me sch311 wrong mnemonics.

I have a MC32 or VGMC and it is setup for MC32, if I use that I cannot get my channels to register?
 
I stand corrected. The 5.5 books do show M32S as a valid response.
 
that is my concern? it says in the NTP's that the correct response for that input is M32S (for a MC32S card)

some special notes about the system:

SSC processor R5.50J system 2121
last patch from the Deplist on SSC is P30436_1.ssc (total patches are almost 194)

just wondering if the Small System Controller is supported on R5.5?
 
resolved my issue, a CS1000 SSC R5.5 will support a MC32 and MC32S cards, they are configured the same way, command line in LD 14 the prompt XTRK = mc32 for both models?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top