Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can a vec ignore go to steps and go somewhere else??

Status
Not open for further replies.

NatThomas

Technical User
Oct 20, 2005
44
GB
Hi Guys,

Is there anyway a vec would ignore a step?

Reason I`m asking is in ref to this vec:

01 wait-time 2 secs hearing ringback
02 goto step 15 if holiday in table 3
03 goto step 15 if holiday in table 10
04 goto step 15 if staffed-agents in skill 999 > 0
05 goto step 15 if time-of-day is fri 20:00 to sat 09:00
06 goto step 15 if time-of-day is sat 17:00 to sun 09:00
07 goto step 15 if time-of-day is sun 17:00 to mon 08:00
08 goto step 15 if time-of-day is all 20:00 to all 08:00
09 announcement 12352
10 announcement 12323
11 route-to number 14121 with cov y if unconditionally
12 stop
13 disconnect after announcement 12205
14 stop
15 route-to number 908000835316 with cov n if unconditionally
16 stop

In hol table 3 it said the following :

Month Day Hour Min Month Day Hour Min Description
02 05 09 00 02 05 17 00 DIRECT CLOSED SUND 5th FEB


Calls routed to announcement 12205 which is step 13 all day yesterday for this line.

The account managers want an explanation but I cant give it to them. Its driving me nuts. The number definately routes to the vdn and the vec as Ive tested it and run reports.

Is there any explaination for this or a known issue that would make the vec IGNORE steps??

Im lost ...pleeease please help.

 
it is possible for a vector step to fail

do display events for category "vector"
check against the relevant date to see if you have any failures paste the results into a post
 
Hi,

2 Holiday table empty 223/3 A 02/06/12:26 02/06/12:32 3


This is what i got...Hol table isnt empty though..

Thanks,
Natalie
 
it looks like that may be referring to holiday 10 (vector 223, step 3)

Can you do some testing and change holiday table 3 to today, see if you get re-routed
 
Cant do any testing with the hol table now during office hours. Will have to do it early tomorrow morning. They have a high volume of calls so cant send them anywhere other than the vdn to q to the skill.

Ive told them we are looking into this and but cant see a reason for it at present.

Thanks.and I'll do some testing am tomorrow
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top