Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calls straight to voicemail 2

Status
Not open for further replies.

tirk

IS-IT--Management
Aug 13, 2009
66
US
I dont think there is a send-calls button on this analog phone at a remote site but when dialed it goes straight to voicemail and shows (cover) as soon as I dial it.

is there another setting within the switch that may have been changed?

I cancelled any remote forwarding with FACs but that wasnt it.
 
status station xxxx and post (where xxxx is the called number)
display cover path x (where x is the called station's cover path)

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
GENERAL STATUS
Administered Type: 2500 Service State: in-srv/on-hook or disc
Connected Type: N/A
Extension: 4804
Port: 01C0507 Parameter Download: not-applicable
Call Parked? no SAC Activated? yes
Ring Cut Off Act? no
Active Coverage Option: 1

EC500 Status: N/A Off-PBX Service State: N/A
Message Waiting: VM Server
Connected Ports:


Limit Incoming Calls? no

User Cntrl Restr: none HOSPITALITY STATUS
Group Cntrl Restr: none Awaken at:
User DND: not activated
Group DND: not activated
Room Status: non-guest room
 
GENERAL STATUS

CONNECTED STATION INFORMATION
Part ID Number: unavailable
Serial Number: unavailable

Station Lock Active? no TOD Station Lock: no

page 2




CF Destination Ext:

Enhanced Call Forwarding Destination
Internal External
Unconditional:
Busy:
No Reply:

 
coverage path:

Coverage Path Number: 1
Cvg Enabled for VDN Route-To Party? n Hunt after Coverage? n
Next Path Number: Linkage

COVERAGE CRITERIA

Station/Group Status Inside Call Outside Call
Active? n n
Busy? y y
Don't Answer? y y Number of Rings: 4
All? n n
DND/SAC/Goto Cover? y y
Holiday Coverage? n n

COVERAGE POINTS
Terminate to Coverage Pts. with Bridged Appearances? n
Point1: h99 Rng: Point2:
Point3: Point4:
Point5: Point6:



hunt group 99 is voicemail
 
you have Send All Calls activated. It is on screen one above.
 
oh thanks. Should I just change this to no? Why is it only going straight to voice on this extension only when many use the same coverage path?
 
Code:
display feature-access-codes                                    Page   3 of   9
                               FEATURE ACCESS CODE (FAC)


              Remote Send All Calls Activation: *4     Deactivation: #4
                     Send All Calls Activation: *3     Deactivation: #3

dial the code to deactivate SAC

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
tirk, it's very simple. Someone either knew the feature access code (FAC), typed it in by mistake or something else. It sends any call that the specific extension which has enabled SAC (see your 'status station xxxxx' screen for the entry 'SAC Activated? yes') straight to the coverpath of choice.
The easiest way to turn it off is to have someone type in the Send All Calls Deactivation code, as AvayaTier3 a.k.a. Brett showed above. Typically FACs don't change. So it's a 99.9% chance that the FAC of #3 will work at the phone to deactivate SAC for this extention.

'Knows enough to be dangerous. Wait... make that really dangerous.'
 
thank you all for your replies. I have some more questions. I tried to activate Remote SAC so I could activate/deactivate that way as well. But it wont let me add any numbers except FACS that are already assigned. Enter 1-4 digit number; * and # may be used as first digit.

Here's my diaplan:

Dialed Total Call Dialed Total Call Dialed Total Call
String Length Type String Length Type String Length Type
0 1 attd
1 4 ext
2 4 ext
222 3 ext
3 4 ext
333 3 ext
4 4 ext
5 1 fac
6 3 ext
7 3 fac
8 3 dac
9 1 fac
* 2 fac
# 2 fac

Can I just change the total length of * and # to 3 or 4?
 
so you don't have entries for Remote SAC when you look through your FACs via 'display feature'?
you should make sure your own exension has 'console permissions'.

'Knows enough to be dangerous. Wait... make that really dangerous.'
 
nope nothing for remote SAC and yes I have console permissions. I just need to be able to add it to FAC but cant currently.
 
7 3 fac

701 - 799 should be available

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
I got it. after checking the dialplan I see the 7xx range is available giving me plenty options. I set Remote SAC to 777 and 787 and deactivated the user that way.

 
thanks. looks like you beat me by a few seconds.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top