Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calls show as From : 'Anonymous' (Anonymous@Anonymous.invalid) 1

Status
Not open for further replies.

homerggg

Technical User
Aug 13, 2013
43
CA
Hi,

System : IP Office Server Edition 8.1

Question : The calls leaving our system previously were identified as From : 'Anonymous' (Anonymous@xxx.xxx.xxx.xxx­) but they are now identified as From : 'Anonymous' (Anonymous@Anonymous.invalid).

Something tells me I screwed up somewhere. What would cause that ? Where should I look first ?

Regards,

-homerggg
 
In the ARS on the teln. part enter;

NS"Anonymous@xxx.xxx.xxx.xxx­"

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool )
______________________________________
 
Well Bas1234 you did point me in the right direction.

I recently moved the "W" from the system short code (9N -> NW) to the ARS table. My ARS table now show .W"@xxx.xxx.xxx.xxx" where it was ."@xxx.xxx.xxx.xxx" before.

I guess that's why even the IP is now anonymous.

Regards,

-homerggg

 

Is a call from anonymous@anonymous.invalid acceptable or is it "forbidden" per some protocol guidelines or something ?

Regards,

-homerggg
 
It is how your provider want's it, so call them.

anonymous@anonymous.invalid
anonymous@x.x.x.x
0123456789@anonymous.invalid


Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool )
______________________________________
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top