Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calls Not Going to Hunt Group Mailbox

Status
Not open for further replies.

BogeyShooter

Programmer
Nov 21, 2006
135
US
BCM400 4.0 software. I have a hunt group built, 2840 (broadcast)overflow is the vmail dn. I have a mailbox 2840 built and initialized. Calls are not going to mailbox 2840, they go to the general delivery box. I have a DID number assigned to the hunt group. Is there some software patch that addresses this problem?
 
Sounds like it should work.
Maybe make the HG DN the Prime DN under that Target Line.
Double check you can do F980 2840 and get the right MB.
Check to see if it works by dialing the HG DN internaly.

=--(((((((((()--=
curlycord
 
Make your Prime Line for the incoming DID, the Vmail DN.

"Adversity is Opportunity
 
Make sure mailbox 2840 has extension 2840 assigned to it.


--DB
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top